Introduction：13XMolecular sieve Is a sodium-type aluminosilicate,The pore size of the crystal is zero9~10Å（0.9nm）,It can adsorb molecules whose critical diameter is not larger than their pore diameter. indicato： item ball bar 1.6-2.5 3-5 1/16″ 1/8″ Static water adsorption/% ≥ 26.5 26.5 26.5 26.5 Static adsorption of CO2/% ≥ […]
Introduction：4AMolecular sieve is a kind of sodium aluminosilicate,The pore size of the crystal is zero4Å(0.4nm), Molecules with a critical diameter not larger than their pore size can be adsorbed. Indicators： item ball Bar 1.6-2.5 3-5 1/16″ 1/8″ Static water adsorption/% ≥ 21.5 21.5 21.5 21.5 Attrition rate/% ≤ 0.10 0.10 […]
divbo offers high quality Activated Aluminum Desiccant for the absorption of water vapor and other gases from compressed air. divbo Activated Alumina Desiccant is highly porous with a large surface area, which will not weaken or break when subjected to high liquid concentrations. High crush strength and strong, durable shipping bags, allow for easy transport. […]
principle: The filter element is the heart of the filter, as the name implies. The main filter element is also the main principle of the filter, is to purify the original ecological resources and re-use of resources, and the need for purification equipment, filter element is mainly used in oil filtration, water filtration, air filtration […]
Features: Self-cleaning air filter is a new product developed in developed countries, compared with the traditional air filter, the self-cleaning air filter has the advantages of simple structure, long service life of the filter element (cylinder) and less maintenance work. Divboair design and manufacture of self-cleaning drum air filter, drawing on the experience of similar […]
principle： A large quantity of water-bearing steam enters and moves in a centrifugal downward tilt motion; the entrained water is separated by a decrease in speed; the separated liquid flows through a trap to discharge, the dry and clean steam is discharged from the separator outlet. Separation method： 1、Gravity settlement: because the density of a […]
Introduction: The Compressed air precision filter is mainly used for Compressed air cleaning and impurity removal. It filters the dust, water vapor and Compressed air hydrocarbons and bacteria. In addition, Air compressor lubrication systems produce pollutants such as wear particles and oil. Even oil-free compressors produce these substances. This kind of oil is acidic, is […]
Features: This series of equipment adopts the method of catalytic deoxidation + adsorption drying to remove impurities such as oxygen, water, carbon dioxide and dust in nitrogen to obtain high purity nitrogen. After static mixing, the nitrogen and the added hydrogen enter the heat exchanger, and the inlet gas is preheated by the heat from […]
Nitrogen was purified by adding carbon type nitrogen purification device. The principle of palladium carbon fiber deoxidation process is that nitrogen with purity of 99.9% is heated into the deoxidizer containing palladium carbon fiber, the oxygen in nitrogen and the carbon containing the catalyst react with the catalyst palladium as follows: C + O2 […]
Principle: The system consists of a Air compressor, a filter and a membrane separator through which the Compressed air enters the membrane separator, oxygen, water vapor and a small amount of carbon dioxide gas in the air were enriched rapidly through the membrane wall to the other side of the membrane. The outlet pressure of […]
Principle: After being compressed by an air compressor, the air enters the air storage tank through dust removal, oil removal, and drying. It then passes through the air inlet valve and left inlet valve before entering the left adsorption tower. The tower pressure increases, and nitrogen molecules in the compressed air are adsorbed by zeolite […]
Principle: After passing through an air filter to remove dust and mechanical impurities, the air enters the air compressor and is compressed to the required pressure. After strict oil, water, and dust removal purification treatment, clean compressed air is output to ensure the service life of the molecular sieve in the adsorption tower. There are […]
Principle： Using refrigerant to exchange heat with compressed air, the temperature of the compressed air is reduced to the dew point temperature within the range of 2-10 ℃. With the continuous development of the refrigerated dryer industry, more and more companies are entering the air compressor industry, and more and more people are favoring the […]
Principle： The working principle of the zero-gas waste heat regeneration dryer is to use the heat of the high-temperature air discharged from the air compressor to directly heat up the adsorbent through the adsorption process, so that the adsorbent can be completely dehydrated and regenerated, since there is no gas consumption during the heating regeneration […]
Principle： The low gas consumption (zero gas consumption) blower thermal adsorption dryer is an energy-saving compressed air drying device that uses the process of ambient air blower regeneration, which can save a large amount of product gas required for traditional process regeneration. The adsorption principle of the (zero gas consumption) blast heat adsorption dryer is […]
Principle： The working principle of the dryer is to use the heat generated by the high-temperature air discharged from the air compressor to directly heat and raise the temperature of the adsorbent after the adsorption process, so that the adsorbent can be completely dehydrated and regenerated. Since there is no gas consumption during the heating […]
principle： Micro-thermal regeneration adsorption Compressed air dryer is a kind of porous solid surface of the molecular force to absorb moisture in the gas, and thus obtain lower dew point temperature, dry, clean gas purification equipment. It uses Activated alumina with a diameter similar to that of water molecules as adsorbent, adopts the most advanced […]
Principle： A heatless regeneration adsorption compressed air dryer is a purification device that utilizes the molecular force on the surface of porous solid materials to extract moisture from gases, resulting in lower dew point temperatures, drier, and cleaner gases. According to the principle of pressure swing adsorption (PSA), the characteristic of achieving equilibrium between the […]
Vibration probes and sensors at each stageVibration inspection for each stage
The axial load generated by the impeller shaft during high-speed rotation is transmitted through the structure shown in the figure to the low-speed drive gear. It is borne by the bearing of the main drive shaft. This structure increases the operating stability of the impeller shaft and reduces mechanical losses of the unit. Bull gear […]