Features: This series of equipment adopts the method of catalytic deoxidation + adsorption drying to remove impurities such as oxygen, water, carbon dioxide and dust in nitrogen to obtain high purity nitrogen. After static mixing, the nitrogen and the added hydrogen enter the heat exchanger, and the inlet gas is preheated by the heat from […]
Nitrogen was purified by adding carbon type nitrogen purification device. The principle of palladium carbon fiber deoxidation process is that nitrogen with purity of 99.9% is heated into the deoxidizer containing palladium carbon fiber, the oxygen in nitrogen and the carbon containing the catalyst react with the catalyst palladium as follows: C + O2 […]
Principle: The system consists of a Air compressor, a filter and a membrane separator through which the Compressed air enters the membrane separator, oxygen, water vapor and a small amount of carbon dioxide gas in the air were enriched rapidly through the membrane wall to the other side of the membrane. The outlet pressure of […]
Principle: After being compressed by an air compressor, the air enters the air storage tank through dust removal, oil removal, and drying. It then passes through the air inlet valve and left inlet valve before entering the left adsorption tower. The tower pressure increases, and nitrogen molecules in the compressed air are adsorbed by zeolite […]
Principle: After passing through an air filter to remove dust and mechanical impurities, the air enters the air compressor and is compressed to the required pressure. After strict oil, water, and dust removal purification treatment, clean compressed air is output to ensure the service life of the molecular sieve in the adsorption tower. There are […]