Under normal circulation in the compressor system, the oil itself must be filtered in order to remove impurities that may enter the compressor and damage the system. In order to ensure that the oil through the filter is clean, must use the box or screw-mounted lube oil filter to achieve its function. While filtering impurities […]
In refrigeration and natural gas compressors, special inorganic materials are required for the construction of suitable oil separators. In these systems, gases other than air (such as Freon, ammonia, or natural gas) must be removed from the compression and lubrication process before use. These types of gases, often contained in natural gas, are not suitable […]
The oil separation package is in a deep bed oil separator element, placed in a device that can withstand a certain pressure, or similar to the traditional“Tank” type oil filter. Compared with the Standard Oil separator, is enclosed in the pressure tank, easier to replace. Due to the limitation of air flow, the design of […]
In the case of air-oil separators of a given size, another common method of obtaining increased air flow is the so-called“Depth filter” structure. This type of separator uses up to three different grades of Borosilicate glass, which are wrapped around the support pipe and are larger than normal. The finished product, while maintaining low initial […]
A common way to increase the capacity of an air-oil separator at a certain size is to use a pleated filter medium. In this case, the filter medium is passed through a machine that“Folds” or undulates the surface of the normally flat medium. The separator in this configuration, as a standard air-oil separator, is suitable […]
The original design of the standard conventional oil separator was used to remove oil aerosols from the Compressed air stream. The element design consists of evenly packing a support tube with a specific amount of Borosilicate glass fibers. At the appropriate flow rate (cubic feet per minute) and the corresponding operating pressure of the machine, […]
DIVBO offers a full range of PAO, diester and polyglycol based compressor lubricants, designed to match the most difficult compressor application. Continual testing and research combines to ensure that the most effective oil additives are used in order to virtually eliminate such common problems as foaming, oxidation and deposit formation. Listed here, are some examples […]